Welcome to DCC Hobby Supply


MINIATURE BULBS

  When used in a DCC system, locomotive lamps are often replaced for several reasons. Locomotive headlamps and classification lamps are often left on for long periods, even when the engine is not moving. Plastic body shells may overheat and even become distorted. Consequently many modelers replace original lamps with LED's or 1.5 volt bulbs, both of which produce less heat than 12 or 14 volt bulbs. Some locos are plagued with dim headlights when converted to DCC and the bulbs need to be replaced. And of course all bulbs can and will simply burn out at some point. We offer a selection of the most often used miniature lamps.



Product Image Item Name- Price
Sunny White Surface Mount LED with wires attached

Sunny White Surface Mount LED with wires attached

1 Sunny White surface mount LED with 6" magnet wire leads attached for easier installation. Excellent for super tight applications. (Picture...
$3.59

Add:

3mm Golden White LED Kit with Resistors

3mm Golden White LED Kit with Resistors

This LED kit  comes with two 3mm Golden white LED’s , two 680 ohm resistors , and three wires (white and yellow 8”, blue 12”)....
$5.42

Add:

3mm Sunny White LED Kit with Resistors

3mm Sunny White LED Kit with Resistors

This LED kit  comes with two 3mm Sunny White LED’s , two 680 ohm resistors , and three wires (white and yellow 8”, blue...
$5.42

Add:

1.5 volt, 15 mA , 1.2mm Dia. Lamps

1.5 volt, 15 mA , 1.2mm Dia. Lamps

1.5 Volt, 15mA, 1.2mm Diameter Bulbs: Wiring two 1.5 Volt lamps in parallel is not recommended. When one lamp burns out, the other lamp immediately...
$1.04

Add:

1.5 volt, 40 mA , 2.4mm Dia. Lamps

1.5 volt, 40 mA , 2.4mm Dia. Lamps

2.4mm, 40mA, 1.5 Volt Lamps  Manufactured by Miniatronics corp. Wiring two 1.5 Volt lamps in parallel is not recommended. When one lamp burns out,...
$0.95

Add:

1.5 Volt, 15mA, 1.2mm Dia. Lamps, 3Pk.

1.5 Volt, 15mA, 1.2mm Dia. Lamps, 3Pk.

1.5 Volt, 15mA, 1.2mm Diameter Bulbs, 3 Pack: Wiring two 1.5 Volt lamps in parallel is not recommended. When one lamp burns out, the other lamp...
$2.95

Add:

1.5 Volt, 40mA, 2.4mm Dia. Lamps, 3Pk.

1.5 Volt, 40mA, 2.4mm Dia. Lamps, 3Pk.

1.5V, 2.4mm bulb, 3pack: Manufactured by Miniatronics corp. Wiring two 1.5 Volt lamps in parallel is not recommended. When one lamp burns out, the...
$2.75

Add:

TCS VR1.5 Voltage Regulator

TCS VR1.5 Voltage Regulator

The VR1.5 is a 1.5 volt power supply that converts the 12 volts coming from your T series decoder to 1.5 volts to directly power 1.5 volt bulbs. This...
$11.50

Add:

12 Volt, 30ma, 1.7mm bulb

12 Volt, 30ma, 1.7mm bulb

12 Volt, 1.7mm Lamps:   Average life, 5,000 hours. Manufactured by Miniatronics Corp[. The decoder’s function output voltage is...
$1.39

Add:

12 Volt, 30ma, 1.7mm bulb, 3 Pack

12 Volt, 30ma, 1.7mm bulb, 3 Pack

12 Volt, 1.7mm Lamps, 3 Pack:   Average life, 5,000 hours. Manufactured by Miniatronics Corp[. The decoder’s function output voltage...
$3.95

Add:



Your IP Address is: 54.196.7.61
Copyright © 2016 dcchobbysupply.com. Powered by Zen Cart
Parse Time: 0.301 - Number of Queries: 414 - Query Time: 0.136656987961