LAMPS / LEDS / RESISTORS

When used in a DCC system, locomotive lamps are often replaced for several reasons. Locomotive headlamps and classification lamps are often left on for long periods, even when the engine is not moving. Plastic body shells may overheat and even become distorted. Consequently many modelers replace original lamps with LED's or 1.5 volt bulbs, both of which produce less heat than 12 or 14 volt bulbs. Some locos are plagued with dim headlights when converted to DCC and the bulbs need to be replaced. And of course all bulbs can and will simply burn out at some point. We offer a selection of the most often used miniature lamps.
View As :
     

Bulb Clear, 1.5 volt, 30mA , 1.2mm

Bulb Clear, 1.5 volt, 30mA , 1.2mm

$1.52
$1.52

1.5 Volt, 25mA, 1.2mm Diameter Bulbs: Wiring two 1.5 Volt lamps in parallel is not recommended. When one lamp burns out, the other lamp immediately...

Bulb Clear, 1.5 Volt, 30mA, 1.2mm, 3-Pack

Bulb Clear, 1.5 Volt, 30mA, 1.2mm, 3-Pack

$4.52
$4.52

1.5 Volt, 25mA, 1.2mm Diameter Bulbs, 3 Pack: Wiring two 1.5 Volt lamps in parallel is not recommended. When one lamp burns out, the other lamp...

Bulb Clear, 1.5 volt, 40mA , 2.4mm

Bulb Clear, 1.5 volt, 40mA , 2.4mm

$1.33
$1.33

2.4mm, 40mA, 1.5 Volt Lamps Manufactured by Miniatronics corp. Wiring two 1.5 Volt lamps in parallel is not recommended. When one lamp burns out, the...

Bulb Clear, 1.5 Volt, 40mA, 2.4mm, 3-Pack

Bulb Clear, 1.5 Volt, 40mA, 2.4mm, 3-Pack

$3.96
$3.96

1.5V, 2.4mm bulb, 3pack: Manufactured by Miniatronics corp. Wiring two 1.5 Volt lamps in parallel is not recommended. When one lamp burns out, the...

Bulb Blue, 1.5 volt, 30mA , 1.2mm, 4-Pack

Bulb Blue, 1.5 volt, 30mA , 1.2mm, 4-Pack

$6.05
$6.05

1.5 Volt, 25mA, 1.2mm Diameter Bulbs: BLUE Wiring two 1.5 Volt lamps in parallel is not recommended. When one lamp burns out, the other lamp...

Bulb Green, 1.5 volt, 30mA , 1.2mm, 4-Pack

Bulb Green, 1.5 volt, 30mA , 1.2mm, 4-Pack

$6.05
$6.05

1.5 Volt, 25mA, 1.2mm Diameter Bulbs: GREEN Wiring two 1.5 Volt lamps in parallel is not recommended. When one lamp burns out, the other lamp...

Bulb Red, 1.5 volt, 30mA , 1.2mm, 4-Pack

Bulb Red, 1.5 volt, 30mA , 1.2mm, 4-Pack

$6.05
$6.05

1.5 Volt, 25mA, 1.2mm Diameter Bulbs: RED Wiring two 1.5 Volt lamps in parallel is not recommended. When one lamp burns out, the other lamp...

Bulb Yellow, 1.5 volt, 30mA , 1.2mm, 4-Pack

Bulb Yellow, 1.5 volt, 30mA , 1.2mm, 4-Pack

$6.05
$6.05

1.5 Volt, 25mA, 1.2mm Diameter Bulbs: YELLOW Wiring two 1.5 Volt lamps in parallel is not recommended. When one lamp burns out, the other lamp...

TCS VR1.5 Voltage Regulator

TCS VR1.5 Voltage Regulator

$11.50
$11.50

The VR1.5 is a 1.5 volt power supply that converts the 12 volts coming from your T series decoder to 1.5 volts to directly power 1.5 volt bulbs. This...

Bulb, Clear, 12 Volt, 30mA, 1.7mm

Bulb, Clear, 12 Volt, 30mA, 1.7mm

$2.15
$2.15

12 Volt, 1.7mm Lamps:   Average life, 5,000 hours. Manufactured by Miniatronics Corp[. The decoder’s function output voltage is typically a little...