HARNESSES

DCC Harnesses are used to make it easier to connect  (or disconnect) a decoder to a locomotive. The connector at the decoder end is usually the 9-pin "JST" connector, while the locomotive end can be anything from bare wires to solder, to an NMRA 8-pin plug.

View As :
     

Digitrax DHWH Wiring Harness

Digitrax DHWH Wiring Harness

$2.59
$2.59

Features: Digitrax 9 pin plug (JST) to 7" bare wire harness. MSRP is $3.00.

Digitrax DHWHP Wiring Harness

Digitrax DHWHP Wiring Harness

$4.99
$4.99

Features: Digitrax 9 pin to DCC medium plug long harness (3”) Allows you to share decoders among several locos. Interoperable with other DCC...

Digitrax DHWHPS Wiring Harness

Digitrax DHWHPS Wiring Harness

$4.99
$4.99

The DHWHPS is a 1 inch long harness with Digitrax 9 pin plug to NMRA medium plug. MSRP is $6.00.

ESU (LokSound) "Female" 8-pin Socket Harness

ESU (LokSound) "Female" 8-pin Socket Harness

$3.89
$3.89

NMRA 8-pin Female Socket : If you don't have an 8-pin socket in your locomotive and you want or need one this harness can be wired in. This is...

NCE Atlas Harness

NCE Atlas Harness

$10.35
$10.35

Atlas Harness: Converts D408SR decoder to a plug and play decoder for:   Weaver 2-8-0 and New Haven I-5 Atlas (new) SW8/9, RS1,C44-9, SD35, C40-8,...

TCS "MC-VO" Harness

TCS "MC-VO" Harness

$4.99
$4.99

MC series harness designed to fit the stewart VO-1000 locomotive. Barely .75 inches between connectors. MSRP is $5.99.

TCS "WH" Harness

TCS "WH" Harness

$2.29
$2.29

WH Harness: This is a bare wire harness with a 9-pin JST male connector at one end which plugs directly into many decoders. MSRP is $2.95.

TCS Auxillary 6" harness for T Series Decoders

TCS Auxillary 6" harness for T Series Decoders

$1.85
$1.85

AUX-WH is an auxiliary harness for the T series decoders to connect to the 1.5 volt output.MSRP is $2.20.

TCS MC-1" Harness

TCS MC-1" Harness

$6.99
$6.99

MC series harness. Connects mini 7 pin plug to NMRA 8 pin socket with 1.0 inch harness length. This harness with the MC2 decoder works very well...

TCS MC-3.5" Harness

TCS MC-3.5" Harness

$6.99
$6.99

MC series harness with mini 7 pin decoder plug to NMRA 8 pin socket. Harness length, approximately 3.75 inches. MSRP is $7.99.

New Products - HARNESSES