HARNESSES

DCC Harnesses are used to make it easier to connect  (or disconnect) a decoder to a locomotive. The connector at the decoder end is usually the 9-pin "JST" connector, while the locomotive end can be anything from bare wires to solder, to an NMRA 8-pin plug.

View As :
     

TCS Auxillary 6" harness for T Series Decoders

TCS Auxillary 6" harness for T Series Decoders

$1.85-10%$1.67
$1.85-10%$1.67

AUX-WH is an auxiliary harness for the T series decoders to connect to the 1.5 volt output.MSRP is $2.20.

TCS T-1" Harness

TCS T-1" Harness

$7.49-10%$6.74
$7.49-10%$6.74

"Short Harness" with 1.05 inch between 9 pin and NMRA 8-pin plug connectors. MSRP is 9.95 .

TCS T-3.5"-21 Harness

TCS T-3.5"-21 Harness

$8.52-10%$7.67
$8.52-10%$7.67

T-3.5"-21 is a harness with 3.5" (8.89 cm) connecting a 9-Pin JST to NEM21 socket. MSRP is $10.65. (Picture courtesy of TCS.)

TCS T-3.5" Harness

TCS T-3.5" Harness

$7.49-10%$6.74
$7.49-10%$6.74

T-3.5" is a 3.5" harness for the T series with a NMRA plug. MSRP is $9.95. (Picture courtesy of TCS.)

TCS T-5" Harness

TCS T-5" Harness

$6.95-10%$6.26
$6.95-10%$6.26

T-5" is a 5" harness for T series decoders. MSRP is $8.55.

NCE Atlas Harness

NCE Atlas Harness

$10.35
$10.35

Atlas Harness: Converts D408SR decoder to a plug and play decoder for:   Weaver 2-8-0 and New Haven I-5 Atlas (new) SW8/9, RS1,C44-9, SD35, C40-8,...

Specials