HARNESSES/CONNECTORS

DCC Harnesses are used to make it easier to connect  (or disconnect) a decoder to a locomotive. The connector at the decoder end is usually the 9-pin "JST" connector, while the locomotive end can be anything from bare wires to solder, to an NMRA 8-pin plug.

View As :
     

TCS MC-1" (Short)Harness

TCS MC-1" (Short)Harness

$7.49
$7.49

MC series harness. Connects mini 7 pin plug to NMRA 8 pin socket with 1.0 inch harness length. This harness with the MC2 decoder works very well in...

TCS MC-3.5" Harness

TCS MC-3.5" Harness

$7.49
$7.49

MC series harness with mini 7 pin decoder plug to NMRA 8 pin socket. Harness length, approximately 3.75 inches. MSRP is $9.95.

TCS MC-WH Hareness, 7 pin plug

TCS MC-WH Hareness, 7 pin plug

$2.24
$2.24

MC-WH Harness MC-WH is a 7" plug in harness with the wires free on the end for hardwiring into a locomotive. MSRP $2.95  Photo courtesy of TCS

TCS MC-S1 Harness

TCS MC-S1 Harness

$7.07
$7.07

MC-S1 is a MC series harness with a NMRA plug for the Life Like S1 Switcher. MSRP is $8.95

TCS "WH" Harness

TCS "WH" Harness

$2.29
$2.29

WH Harness: This is a bare wire harness with a 9-pin JST male connector at one end which plugs directly into many decoders. MSRP is $2.95.

TCS T-1" Harness

TCS T-1" Harness

$7.49
$7.49

"Short Harness" with 1.05 inch between 9 pin and NMRA 8-pin plug connectors. MSRP is 9.95 .

TCS T-3.5" Harness

TCS T-3.5" Harness

$7.49
$7.49

T-3.5" is a 3.5" harness for the T series with a NMRA plug. MSRP is $9.95. (Picture courtesy of TCS.)

TCS T-3.5"-21 Harness

TCS T-3.5"-21 Harness

$8.52
$8.52

T-3.5"-21 is a harness with 3.5" (8.89 cm) connecting a 9-Pin JST to NEM21 socket. MSRP is $10.65. (Picture courtesy of TCS.)

TCS T-5" Harness

TCS T-5" Harness

$7.49
$7.49

T-5" is a 5" harness for T series decoders. MSRP is $9.95.

TCS Harness, E6, LifeLike E6

TCS Harness, E6, LifeLike E6

$7.56
$7.56

E6, LifeLike Proto 2000 E6 Harness The E6 harness is designed to fit in the Life Like Proto 2000 E6 Locomotive. With special wiring for mars...