Welcome to DCC Hobby Supply


HARNESSES

DCC Harnesses are used to make it easier to connect (or disconnect) a decoder to a locomotive. The connector at the decoder end is usually the 9-pin "JST" connector, while the locomotive end can be anything from bare wires to solder, to an NMRA 8-pin plug.



Product Image Item Name- Price
ESU (LokSound) "Female" 8-pin Socket Harness

ESU (LokSound) "Female" 8-pin Socket Harness

NMRA 8-pin Female Socket : If you don't have an 8-pin socket in your locomotive and you want or need one this harness can be wired in. This is...
$4.25

Add:

Digitrax DHWHP Wiring Harness

Digitrax DHWHP Wiring Harness

Features: Digitrax 9 pin to DCC medium plug long harness (3”) Allows you to share decoders among several locos. Interoperable with other DCC...
$4.99

Add:

Digitrax DHWHPS Wiring Harness

Digitrax DHWHPS Wiring Harness

The DHWHPS is a 1 inch long harness with Digitrax 9 pin plug to NMRA medium plug. MSRP is $6.00.
$4.99

Add:

Digitrax DHWH Wiring Harness

Digitrax DHWH Wiring Harness

Features: Digitrax 9 pin plug (JST) to 7" bare wire harness. MSRP is $3.00.
$2.59

Add:

TCS MC-1" Harness

TCS MC-1" Harness

MC series harness. Connects mini 7 pin plug to NMRA 8 pin socket with 1.0 inch harness length. This harness with the MC2 decoder works very well...
$6.99

Add:

TCS MC-3.5" Harness

TCS MC-3.5" Harness

MC series harness with mini 7 pin decoder plug to NMRA 8 pin socket. Harness length, approximately 3.75 inches. MSRP is $7.99.
$6.99

Add:

TCS MC-5" Harness

TCS MC-5" Harness

MC-LH is a 5" Harness wth a NMRA plug for the MC 7-pin connector series decoders. MSRP is $8.55.
$6.99

Add:

TCS "MC-VO" Harness

TCS "MC-VO" Harness

MC series harness designed to fit the stewart VO-1000 locomotive. Barely .75 inches between connectors. MSRP is $5.99.
$4.99

Add:

TCS "WH" Harness

TCS "WH" Harness

WH Harness: This is a bare wire harness with a 9-pin JST male connector at one end. MSRP is $2.13.
$1.99

Add:

TCS Auxillary 6" harness for T Series Decoders

TCS Auxillary 6" harness for T Series Decoders

AUX-WH is an auxiliary harness for the T series decoders to connect to the 1.5 volt output.MSRP is $2.20.
$1.85

Add:



Your IP Address is: 54.197.183.75
Copyright © 2014 dcchobbysupply.com. Powered by Zen Cart
Parse Time: 0.259 - Number of Queries: 403 - Query Time: 0.0741208481598