ESU-LokPilot Decoders

ESU LokPilot DCC decoders offer quality performance and a complete range of features. Depending on your needs, they are available with a variety of features and support NMRA standards. "Dual mode" operation on both DC and DCC layouts is supported as well. For more information on LokPilot decoders click on the following link.

View As :
     

ESU LokPilot "Standard" DCC Decoder w/ 8-Pin Plug

ESU LokPilot "Standard" DCC Decoder w/ 8-Pin Plug

$19.99
$19.99

LokPilot "Standard" DCC Decoder w/ 8-Pin Plug: The LokPilot Standard is a first class DCC decoder. 14 - 128 speed steps simply go without...

ESU LokPilot "Standard" DCC Decoder w/ 21-Pin PConnector

ESU LokPilot "Standard" DCC Decoder w/ 21-Pin PConnector

$19.99
$19.99

LokPilot "Standard" DCC Decoder w/ 21-Pin Connector: The LokPilot Standard is a first class DCC decoder. 14 - 128 speed steps simply go...

LokPilot Multirotocol V4.0 Decoder with 8-Pin Connector

LokPilot Multirotocol V4.0 Decoder with 8-Pin Connector

$30.95
$30.95

L okPilot V4.0, multiprotocol decoder (MM/DCC/SX), with 8-pin plug: Operational modes: The LokPilot V4.0 supports, like its forerunners DCC,...

LokPilot V4.0 DCC Decoder with 8-Pin Connector

LokPilot V4.0 DCC Decoder with 8-Pin Connector

$27.95
$27.95

LokPilot V4.0, DCC Decoder  with 8-pin plug: Operational modes: The LokPilot V4.0 DCC supports, like its forerunners the world-wide...

LokPilot DCC V4.0, with 6-Pin Connector

LokPilot DCC V4.0, with 6-Pin Connector

$28.85
$28.85

The LokPilot DCC V4.0 : The LokPilot V4.0 DCC supports, like its forerunners the world-wide standardised DCC protocol and can be used in combination...

LokPilot V3.0 with 8 Pin Plug

$41.95$33.56-20%
$41.95$33.56-20%

LokPilot V3.0 with 8-Pin Plug: LokPilot V3.0, top of the range, speaks DCC, Motorola® and Selectrix®. Armed for the coming NMRA DCC...

ESU LokPilot Micro V4.0, 8 Pin NMRA Plug (NEM652)

$32.95
$32.95

The LokPilot micro V4.0 with 8-pin NMRA Medium Plug (NEM652) is a genuine power house. It drives the loco motor with a continuous load capability of...

ESU LokPilot Micro V4.0, 6 Pin Plug (NEM651)

$32.95
$32.95

The LokPilot micro V4.0 with 6-pin plug (NEM651) is a genuine power house. It drives the loco motor with a continuous load capability of 0.75A...

ESU LokPilot Micro V4.0, DCC, 6-pin NEM651 direct connection

$32.59
$32.59

LokPilot Micro DCC with direct-connect 6-pin (NEM651) plug. NOTE: The picture does not show this decoder. It has a 6-pin plug connected directly to...

ESU LokPilot XL V4.0

$77.95
$77.95

The all-new LokPilot XL V4.0 can be used with DCC, Motorola®, Selectrix® and M4 and cannot only provide up to 4.0A continuous load for the...

New Products - MOBILE DECODERS