Lenz Silver21+ Decoder with 21-pin connector

21-pin connector for locomotives that have 21 pin socket

Features include:

• Asymmetric DCC for location specific commands using  BM Series for Block management
• Ultra Thin! for tight spaces- one sided

•  Super smooth and silent high frequency back-emf motor control.

• Asymmetrical DCC support including directional stopping

• Adjustable precision stopping control

• Low speed gear for switching operations

• Selectable for operation with 14/27, or 28/128 speed steps.

• Operation on conventional DC layouts is possible or can be disabled.

•  Motor output = 1A continuous, 1.8A max, > 5 A stall.

•  Motor and function outputs protected

•  Four function outputs rated at 100mA each with advanced function mapping

• Directional or independent lighting with dimming and special effects.

• Support for Advanced Consist Control and Extended Addressing

• Support for programming on the mainline (operations mode programming)

•  Support for all form of programming as described in NMRA RP-9.2.3

• Supports service mode decoder lock

• Size: L 0.91" x W 0.66"x H 0.12"   L 23mm x W 16.6mm x H 2.9mm 

• **All the SILVER and SILVER+ decoders come with Lenz' leading 10 year warranty and can have their software upgraded using the Digital Plus decoder programmer even after the decoder is installed in the locomotive.

  MSRP is $49.00.