- Asymmetric DCC for location specific commands using BM Series for Block management
- Ultra Thin! for tight spaces- one sided NMRA 8 pin plug
- Super smooth and silent high frequency back-emf motor control.
Asymmetrical DCC support including directional stopping
Adjustable precision stopping control
Low speed gear for switching operations
Selectable for operation with 14/27, or 28/128 speed steps.
Operation on conventional DC layouts is possible or can be disabled.
Motor output = 1A continuous, 1.8A max, > 5 A stall.
Motor and function outputs protected
Four function outputs rated at 100mA each with advanced function mapping
Directional or independent lighting with dimming and special effects.
Support for Advanced Consist Control and Extended Addressing
Support for programming on the mainline (operations mode programming)
Support for all form of programming as described in NMRA RP-9.2.3
Supports service mode decoder lock
Size: L 0.91" x W 0.66"x H 0.12" L 23mm x W 16.6mm x H 2.9mm
**All the SILVER and SILVER+ decoders come with Lenz' leading 10 year warranty and can have their software upgraded using the Digital Plus decoder programmer even after the decoder is installed in the locomotive.
The Silver Series decoderscome with highest performance possible with 6th generation Load Compensation (or "BACK EMF") , Silent Drive for exceptionally quiet performance.
MSRP is $44.27.
This product was added to our catalog on Thursday 15 October, 2009.