ESU LokPilot "Standard" DCC Decoder w/ 8-Pin Plug

  • 4 Units in Stock
  • Model: ESU53611
  • Shipping Weight: 0.5lbs
  • Manufactured by: ESU(LokSound)

LokPilot "Standard" DCC Decoder w/ 8-Pin Plug:

The LokPilot Standard is a first class DCC decoder. 14 - 128 speed steps simply go without saying as well as 2 and 4 digit addresses.  Thanks to RailComPlus® the decoder automatically registers at a suitable command station (e.g. ECoS). It supports all DCC programming modes and can be operated and programmed with all DCC compatible digital command stations: thanks to RailCom® one can also read out CV values on the main with a suitable command station.
  The output stage of the LokPilot Standard  decoder generates 0.9A continuous current and easily handles all commonly available DC motors as well as coreless motors; regardless if the motor is by ROCO®, Fleischmann®, Tillig®, Piko®, Brawa®, Bemo®, Faulhaber® or Maxon®. Load control with 20 kHz PWM frequency assures quiet running and lets your locomotives crawl slowly over your layout if you wish them to do so. Load control can be adapted optimally to the particular type of motor by means of three CVs. Due to the simulated inertia the locomotive will not jerk, not even in 14 speed step mode.

MSRP is $29.99.