LAMPS / LEDS / RESISTORS

When used in a DCC system, locomotive lamps are often replaced for several reasons. Locomotive headlamps and classification lamps are often left on for long periods, even when the engine is not moving. Plastic body shells may overheat and even become distorted. Consequently many modelers replace original lamps with LED's or 1.5 volt bulbs, both of which produce less heat than 12 or 14 volt bulbs. Some locos are plagued with dim headlights when converted to DCC and the bulbs need to be replaced. And of course all bulbs can and will simply burn out at some point. We offer a selection of the most often used miniature lamps.
View As :
     

LED Yellow, Circuit Board Mount, 10 Pack

LED Yellow, Circuit Board Mount, 10 Pack

$26.99
$26.99

10x Yellow SMLED w/ Circuit Board 10 Yellow Surface Mount LED's mounted to a circuit board for easy wire attachment. Once you attached the wires...

LED 3mm Golden White Kit with Resistors

LED 3mm Golden White Kit with Resistors

$5.50
$5.50

This LED kit  comes with two 3mm Golden white LED’s , two 680 ohm resistors , and three wires (white and yellow 8”, blue 12”). MSRP is $6.95.

LED 3mm Sunny White Kit with Resistors

LED 3mm Sunny White Kit with Resistors

$5.99
$5.99

This LED kit  comes with two 3mm Sunny White LED’s , two 680 ohm resistors , and three wires (white and yellow 8”, blue 12”). MSRP is $7.95.

Bulb Clear, 1.5 volt, 30mA , 1.2mm

Bulb Clear, 1.5 volt, 30mA , 1.2mm

$1.52
$1.52

1.5 Volt, 25mA, 1.2mm Diameter Bulbs: Wiring two 1.5 Volt lamps in parallel is not recommended. When one lamp burns out, the other lamp immediately...

Bulb Clear, 1.5 Volt, 30mA, 1.2mm, 3-Pack

Bulb Clear, 1.5 Volt, 30mA, 1.2mm, 3-Pack

$4.52
$4.52

1.5 Volt, 25mA, 1.2mm Diameter Bulbs, 3 Pack: Wiring two 1.5 Volt lamps in parallel is not recommended. When one lamp burns out, the other lamp...

Bulb Clear, 1.5 volt, 40mA , 2.4mm

Bulb Clear, 1.5 volt, 40mA , 2.4mm

$1.33
$1.33

2.4mm, 40mA, 1.5 Volt Lamps Manufactured by Miniatronics corp. Wiring two 1.5 Volt lamps in parallel is not recommended. When one lamp burns out, the...

Bulb Clear, 1.5 Volt, 40mA, 2.4mm, 3-Pack

Bulb Clear, 1.5 Volt, 40mA, 2.4mm, 3-Pack

$3.96
$3.96

1.5V, 2.4mm bulb, 3pack: Manufactured by Miniatronics corp. Wiring two 1.5 Volt lamps in parallel is not recommended. When one lamp burns out, the...

Bulb Blue, 1.5 volt, 30mA , 1.2mm, 4-Pack

Bulb Blue, 1.5 volt, 30mA , 1.2mm, 4-Pack

$6.05
$6.05

1.5 Volt, 25mA, 1.2mm Diameter Bulbs: BLUE Wiring two 1.5 Volt lamps in parallel is not recommended. When one lamp burns out, the other lamp...

Bulb Green, 1.5 volt, 30mA , 1.2mm, 2-Pack

Bulb Green, 1.5 volt, 30mA , 1.2mm, 2-Pack

$2.90
$2.90

1.5 Volt, 25mA, 1.2mm Diameter Bulbs: GREEN Wiring two 1.5 Volt lamps in parallel is not recommended. When one lamp burns out, the other lamp...

Bulb Green, 1.5 volt, 30mA , 1.2mm, 4-Pack

Bulb Green, 1.5 volt, 30mA , 1.2mm, 4-Pack

$5.80
$5.80

1.5 Volt, 25mA, 1.2mm Diameter Bulbs: GREEN Wiring two 1.5 Volt lamps in parallel is not recommended. When one lamp burns out, the other lamp...