HARNESSES/CONNECTORS

DCC Harnesses are used to make it easier to connect (or disconnect) a decoder to a locomotive. The connector at the decoder end is usually the 9-pin "JST" connector, while the locomotive end can be anything from bare wires to solder, to an NMRA 8-pin plug.

Displaying 31 to 40 (of 64 products)

1 2 3 4 5 ...

TCS Connector, 6-Pin JST

$0.75

6-pin micro-JST surface mount female connecter - used on the backside of the T4X-T6X for the VO-1.5 MSRP $0.95

Call to Order + Add to Wishlist + Add to Compare

TCS Connector 2-Pin Micro (Black&Red)

$9.49

TCS 2-Pin Micro Connector (Red and Black Wires) This is a simple, two pin, 1 mm (0.039") pitch, micro quick plug wired connector. These amazing new...

Call to Order + Add to Wishlist + Add to Compare

TCS 4-Pin Mini Connector

$11.00

4-Pin Mini Connector 6" 32 gauge wire connected. Connector size .214 X .083 x .244 Color combination is Orange, Grey, Red, and Black. MSRP is $13.95....

Call to Order + Add to Wishlist + Add to Compare

TCS 2-Pin Mini Connector 32 AWG B/W

$10.29

2-Pin Mini Connector This is a simple, two pin, mini, quick plug, wired connector. When connected together it is .12" wide by .085" tall by .243"...

Add:

+ Add to Wishlist + Add to Compare

TCS "MC-VO" Harness

$9.49

MC series harness designed to fit the stewart VO-1000 locomotive. Barely .75 inches between connectors. MSRP is $11.95

Add:

+ Add to Wishlist + Add to Compare

SoundTraxx, NMRA-Compatible 8-Pin Connector (4-Pack)

$11.29

NMRA-Compatible 8-Pin Connector; This set of four 8-pin connectors is designed to facilitate wiring in locomotives equipped with a DCC-ready socket....

Add:

+ Add to Wishlist + Add to Compare