HARNESSES/CONNECTORS

DCC Harnesses are used to make it easier to connect (or disconnect) a decoder to a locomotive. The connector at the decoder end is usually the 9-pin "JST" connector, while the locomotive end can be anything from bare wires to solder, to an NMRA 8-pin plug.

Displaying 11 to 20 (of 64 products)

1 2 3 4 5 ...

TCS MC-WH Harness, 7 pin plug

$3.19

MC-WH Harness MC-WH is a 7" plug in harness with the wires free on the end for hardwiring into a locomotive. MSRP $3.95 Photo courtesy of TCS

Call to Order + Add to Wishlist + Add to Compare

TCS Plug Kit, CBU Pins, NMRA 8-Pin

$3.19

All the pieces you need to put together a 8 pin NMRA plug.

Call to Order + Add to Wishlist + Add to Compare

TCS Extension Plug, NMRA 8-Pin

$4.79

An extension plug for the NMRA 8-Pin connector.

Add:

+ Add to Wishlist + Add to Compare

TCS Plug, Solder Pads, NMRA 8-Pin

$4.79

8 pin NMRA plug, pre-made and ready for wires to be soldered on from a decoder/etc. Can be plugged into any locomotive with an 8-pin connector. NOTE:...

Add:

+ Add to Wishlist + Add to Compare

Digitrax DHWHP Wiring Harness

$4.99

Features: Digitrax 9 pin to DCC medium plug long harness (3) Allows you to share decoders among several locos. Interoperable with other DCC systems...

Add:

+ Add to Wishlist + Add to Compare